Small Size Electric Pipe Beveling Machine And Pipe Beveler BPP1E
kit1
Product Introduction
BPP series of internal-expanding pipe beveling machine is the pipe
processing equipment independently developed by our company based
on the market and prospect of the pipe service industry. The
products are portable, precise, efficient and in modular design,
fully meeting customer demands. It's designed for simultaneous
facing and beveling tubes and pipes (including carbon steel, alloy
steel and stainless steel) from 12.5mm to 240mm I.D. up to a wall
thickness of 0.75" (18mm).
than this scope, please choose our split frame machines).
Industry Application
BPP series of pipe beveling machines are widely applied in boiler
plants, pressure vessels, heat exchangers, power plant, nuclear
power, petroleum, chemical engineering, natural gas, pharmacy, pipe
prefabrication plant, pipeline installation engineering,
rush-repair work, etc.
Features
■ Portability: Our BPP series are packed with suitcase, which is
convenient for carrying and allows you to finish processing
outdoors.
■ Quick installation: After being taken out from the suitcase, the
machine will be ready only by positioning it at the center of the
pipe through the ratchet wrench and equipping it with a suitable
cutter. The process will not exceed 3 minutes. The machine will
start to work after pressing down the motor button.
■ Safety and reliability: Through multi-stage deceleration by the
internal bevel gear of the angle grinder, the planetary reducer and
the internal bevel gear of the main shell, the machines can operate
under slow rotating speed while keeping large torque, which makes
the beveled end smooth and flat and in high quality, and extends
the service of the cutter.
Technical Parameters
Product series
Model | Processing range (IDmm) | Wall thickness (mm) | Rated power (kw) | Rotating speed (rpm) |
BPP1E kit1 | 12.5-15 | ≤3 | 1.43 | 3-70 |
BPP1E kit2 | 15-20 | ≤5 | 1.43 | 3-70 |
BPP1E kit3 | 20-28 | ≤6 | 1.43 | 3-70 |
BPP3E/ BPP3P | 26-79 | ≤15 | 1.43 | 3-70 |
BPP3PE | 36-90 | ≤15 | 1.43 | 3-50 |
BPP4E/ BPP4P | 45-105 | ≤20 | 1.43 | 34 |
BPP6E/ BPP6P | 65-159 | ≤20 | 1.43 | 34 |
BPP9E | 80-240 | ≤15 | 1.43 | 16 |
*Electric: Rated voltage of 220V, 50/60Hz
Installation & Processing
■ During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
Safety Instructions
Safety is our priority when pipe beveling machines are designed,
and ergonomics is also taken into consideration to ensure product
safety and reliability.
■ Before operation, please carefully check for loose connections,
blocked rotating parts, or any damage and other factors that may
affect the operation or lead to hidden dangers.
■ The applicable scope of the machine should be strictly followed
for pipe processing.
■ Do not touch electric switches and buttons with wet hands to
avoid electric shock.
■ Before operation, ensure the operators are kept away from any
live part such as motors and cables.
■ The machines should not be operated outdoors when it rains.
■ Before disassembly or replacement of cutting tools, please ensure
the machines are cooled down to the safety temperature to prevent
from burning.
■ It is strictly forbidden to transform the machines or replace
accessories with those not produced by the original manufacturer
without approval.
