Product Introduction
Beveling tools of BPP inner mounted pipe beveling machines can
bevel different angles under customer requirement. Our tools are
made of high-speed steel and applicable to process all types of
carbon steel. Therefore, our BPP ID mounted pipe beveling machines
are your best choice for processing small-diameter pipes from12.5mm
to 240mm ID. up to a wall thickness of 18mm.
Features
■ Made of lightweight and high-strength aeronautical aluminum
material to ensure portability.
■ The machines are small and light since their main body is made of
aviation aluminum and the sizes of all parts are optimized. The
well designed expansion mechanism can realize quick and precise
positioning, moreover, the machines are solid enough, with
sufficient rigidity for the processing. A variety of available
cutters enable the machines to process pipes of different materials
and bevel ends with various angles and plain ends. Besides, the
unique structure and its self-lubrication function endow the
machines with long service life.
■ Position the machine in the center of the tube and install the
appropriate tool to complete the preparation.
Technical Parameters
Product series
Model | Processing range (IDmm) | Wall thickness (mm) | Rated power (kw) | Rotating speed (rpm) |
BPP1E kit1 | 12.5-15 | ≤3 | 1.43 | 3-70 |
BPP1E kit2 | 15-20 | ≤5 | 1.43 | 3-70 |
BPP1E kit3 | 20-28 | ≤6 | 1.43 | 3-70 |
BPP3E/ BPP3P | 26-79 | ≤15 | 1.43 | 3-70 |
BPP3PE | 36-90 | ≤15 | 1.43 | 3-50 |
BPP4E/ BPP4P | 45-105 | ≤20 | 1.43 | 34 |
BPP6E/ BPP6P | 65-159 | ≤20 | 1.43 | 34 |
BPP9E | 80-240 | ≤15 | 1.43 | 16 |
*Electric: Rated voltage of 220V, 50/60Hz
Safety Instructions
Safety is our priority when pipe beveling machines are designed,
and ergonomics is also taken into consideration to ensure product
safety and reliability.
■ Operators should read the safety instructions carefully before
operation and properly keep them for reference at any time.
■ Operators should be well aware of the products and fully familiar
with the key points of product operations.
■ Please wear suitable working clothes and safety shoes before
operation.
■ Before operation, ensure the operators are kept away from any
live part such as motors and cables.
■ Operators should be kept away from the rotating cutter head as
far as possible for safety when the machine is working.
■ The machines should be used in clean environment and should not
be used in messy circumstances; if it is necessary to be used in
dusty conditions, please wear masks before operation.
■ For electrical pipe beveling machines, please check whether the
voltage of the power supply is correct; for pneumatic pipe beveling
machines please check whether air pressure and flow of the air
source are correct.
Information and Feedback
Maintenance Information: Before the machine or any of its
accessories is returned for maintenance, please call Bohyar
Company. We will give suggestions on transportation and handover of
the machine or accessories, and estimate the time and cost of
corresponding maintenance.
Feedback: To constantly improve the satisfaction of users with the
product quality and service, we will appreciate if you contact us
to present any better operation or service methods of the equipment
or any suggestion on the optimization of any technical data. We
will consider and undertake to validate your precious suggestions,
so as to modify or update the product and operation manual for
improvement.
